Sound Exchange USA Yorkville Sound PGM8 Compact 8-Channel Live Sound Mixer With Built-In Digital Effects MIXERS

Yorkville Sound PGM8 Overview

The Yorkville Sound PGM8 is a compact eight-channel live sound mixer with built-in digital effects offering versatile signal mixing in a space-saving format. Its six microphone preamps provide up to 84 dB of gain and 48 VDC phantom power. Four mono and two stereo line inputs are also available, and input four can be switched from line to Hi-Z for direct connection of a guitar or bass. Each channel features a high-pass filter, 3-band EQ, integrated soft-knee compression, a 60mm fader, and controls for pan, mute, monitor level, and aux send level.

Hook up your favorite external time-based processor via the 1/4″ external send and return jacks, or utilize the onboard 24-bit stereo digital effects processor, which boasts 16 presets such as reverb, echo, and modulation. Further enhance the tone of your mix with the stereo 7-band graphic equalizer. Route the balanced XLR and 1/4″ main outputs to PA speakers, and use the monitor and headphone output jacks to for artist and engineer monitoring. RCA record outputs allow for a dedicated stereo feed to an outboard mix recorder. Patch a CD player or mobile device to the RCA media input for convenient house music.

8-channel mixer in a compact, durable steel enclosure Onboard 24-bit digital effects processor with 16 presets such as reverb, echo, modulation, and more Balanced mic and line inputs Switchable line/Hi-Z input accommodates direct connection of a guitar or bass Switchable 48 VDC phantom power 60mm faders for all channels, effects return, stereo return, mono output, and main bus Integrated dual-slope, soft-knee compressor per channel helps control performance dynamics 3-band EQ and high-pass filter on each channel Stereo 7-band graphic equalizer on main bus Per-channel LEDs indicate clipping and ideal levels 3-pin XLR inputs accept microphones with impedance ratings from 50 Ohms to 10 kOhms 1/4″ stereo headphone output with level control accommodates headphones with impedance ratings down to 8 Ohms (80 Ohms or higher recommended) Balanced XLR and 1/4″ main outputs Internal aux send and return External mono aux send and stereo return Dedicated 1/4″ monitor output with level control for connection to a floor monitor RCA media input with independent volume adjustment Break button mutes all input channels Universal switching power supply
Channels8Mic/Line Inputs6 x 3-Pin XLR Female Microphone Inputs (Balanced)
3 x 1/4″ TRS Mono Line Inputs (Balanced)
1 x 1/4″ Mono Line/Hi-Z Input (Balanced/Unbalanced)
2 x 1/4″ TRS Stereo Line Inputs (Balanced)Main/Monitor Out2 x 3-Pin XLR Male Main Outputs (Balanced)
2 x 1/4″ TRS Main Outputs (Balanced)
1 x 1/4″ TRS Monitor Output (Balanced)
1 x 1/4″ TRS Stereo Headphone Output (Unbalanced)Aux Sends1 x 1/4″ TRS Send (Balanced)Aux Returns2 x 1/4″ TRS Returns (Balanced)2 Trk Master I/O1 x Stereo RCA Coaxial Media Input
1 x Stereo RCA Coaxial Record OutputFootswitch Input1 x 1/4″ TRSChannel EQLow: ±15 dB at 80 Hz
Mid: ±15 dB at 2.5 kHz
High: ±15 dB at 12 kHz
High-Pass Filter: 18 dB / Octave at 80 HzMaster EQ FrequencyBand 1: ±12 dB at 125 Hz
Band 2: ±12 dB at 250 Hz
Band 3: ±12 dB at 500 Hz
Band 4: ±12 dB at 1 kHz
Band 5: ±12 dB at 2 kHz
Band 6: ±12 dB at 4 kHz
Band 7: ±12 dB at 8 kHzTrim/Gain RangeMic Input: -24 to +60 dB
Line Input: -36 to +45 dB
Channel Fader: -Inf to +10 dBSolo/MutePer-Channel Mute
All-Channel MuteChannel Level Control60 mm FadersPhantom Power48 VDC (Selectable, Applies to Channels)MeteringDual 10-Segment LEDsInternal Signal Processing24-Bit Stereo Digital Effects ProcessorFrequency Response20 Hz to 20 kHz (±2 dB)Total Harmonic Distortion (THD)< 0.05%Signal-to-Noise Ratio> -100 dBCrosstalk> -60 dB (Typical, 1 kHz)CMRRMinimum: 55 dB at 60 Hz
Typical: 65 dB at 60 HzPower ConsumptionTypical: 26 VA
Maximum: 60 VAPower Requirements100 to 240 VAC, 50/60 Hz